306 lines
16 KiB
TOML
306 lines
16 KiB
TOML
|
|
[General]
|
|
#Drones render their held item (the item in slot 0 of their inventory) ? Note: this is in common config since if enabled, server needs to sync the item data to the client.
|
|
drones_render_held_item = true
|
|
#Enable Drone Suffocation Damage
|
|
enable_drone_suffocation = true
|
|
#Show particle trail indicating the currently-debugged drone's planned path
|
|
drone_debugger_path_particles = true
|
|
#Maximum number of blocks in the area defined in an Area Programming Puzzle Piece
|
|
#Range: > 1
|
|
max_programming_area = 250000
|
|
#Are drones allowed to import Experience Orbs and convert them to Memory Essence fluid?
|
|
drones_can_import_xp_orbs = true
|
|
#When an Oil Lake would be generated at the surface (see 'oil_generation_chance'), percentage chance that this will actually generate a lake. Set to 0 for no surface oil lakes, and fewer lakes overall. Higher values don't guarantee surface oil lakes, but make them more likely, as well as making oil lakes more likely overall. It is recommended to adjust this value in conjunction with 'oil_generation_chance'.
|
|
#Range: 0 ~ 100
|
|
surface_oil_generation_chance = 25
|
|
#Oil worldgen blacklist: add biome IDs to this list if you don't want oil worldgen to happen there. This works in conjunction with 'oil_world_gen_category_blacklist' - if a biome matches either, then no oil lakes will generate there.
|
|
oil_world_gen_blacklist = ["minecraft:soul_sand_valley", "minecraft:crimson_forest", "minecraft:warped_forest", "minecraft:nether_wastes", "minecraft:the_void", "minecraft:the_end", "minecraft:small_end_islands", "minecraft:end_midlands", "minecraft:end_highlands", "minecraft:end_barrens"]
|
|
#Chance per chunk as a percentage to generate an Oil Lake. Set to 0 for no oil lakes. See also 'surface_oil_generation_chance'.
|
|
#Range: 0 ~ 100
|
|
oil_generation_chance = 15
|
|
#Blacklisted entity ID's, which the Vacuum Trap will not try to absorb. Note that players, tamed entities, boss entities, and PneumaticCraft drones may never be absorbed, regardless of config settings.
|
|
vacuum_trap_blacklist = []
|
|
#Fluids at least as hot as this temperature (Kelvin) will be auto-registered as Liquid Compressor fuels, the quality being dependent on fluid temperature.
|
|
#Range: > 0
|
|
min_fluid_fuel_temperature = 373
|
|
#Enable mod dungeon loot generation
|
|
enable_dungeon_loot = true
|
|
#Efficiency of fuel buckets as furnace fuel (default 0.05 means 1 bucket of LPG smelts 450 items in a vanilla furnace)
|
|
#Range: 0.0 ~ 1.7976931348623157E308
|
|
fuel_bucket_efficiency = 0.05
|
|
#Oil worldgen blacklist by biome category: add biome categories to this list if you don't want oil worldgen to happen there. Accepted categories are: beach, desert, extreme_hills, forest, icy, jungle, mesa, mushroom, nether, none, ocean, plains, river, savanna, swamp, taiga, the_end. This works in conjunction with 'oil_world_gen_blacklist' - if a biome matches either, then no oil lakes will generate there.
|
|
oil_world_gen_category_blacklist = ["none"]
|
|
#Should dyes be used up when coloring things (Drones, Logistics Modules, Redstone Modules)?
|
|
use_up_dyes_when_coloring = false
|
|
|
|
["Machine Properties"]
|
|
#Aerial Interface backwards compat: allow pre-0.8.0 behaviour of getting player's armor inventory from top face, even with Dispenser Upgrade installed
|
|
aerial_interface_armor_compat = true
|
|
#Speed multiplier per speed upgrade: speed mult = speedUpgradeSpeedMultiplier ^ num_of_speed_upgrades
|
|
#Range: 1.0 ~ 2.0
|
|
speed_upgrade_speed_multiplier = 1.5
|
|
#The amount of air produced by using 100 MJ (Minecraft Joules) in the flux compressor
|
|
#Range: > 0
|
|
kinetic_compressor_efficiency = 40
|
|
#The amount of MJ (Minecraft Joules) produced by using 100mL of air in the Pneumatic Dynamo
|
|
#Range: > 0
|
|
pneumatic_engine_efficiency = 40
|
|
#Can the Liquid Hopper absorb/dispense fluids into the world with a Dispenser Upgrade?
|
|
liquid_hopper_dispenser = true
|
|
#Can the Omnidirectional Hopper dispense items into the world with a Dispenser Upgrade?
|
|
omni_hopper_dispenser = true
|
|
#Fuel usage / heat gen multiplier per speed upgrade: usage mult = speedUpgradeUsageMultiplier ^ num_of_speed_upgrades
|
|
#Range: 1.0 ~ 2.0
|
|
speed_upgrade_usage_multiplier = 1.649999976158142
|
|
#Base chance (1/x) per tick of a lightning strike on/around the Electrostatic Generator
|
|
#Range: > 0
|
|
electrostatic_lightning_chance = 100000
|
|
#The ratio of liquid plastic to solid plastic sheets in the Plastic Mixer, in mB per sheet. If set to 0, no default liquid->solid plastic recipe will be added (but CraftTweaker or API can be used to add recipes)
|
|
#Range: > 0
|
|
plastic_mixer_plastic_ratio = 1000
|
|
#The max height of an elevator per stacked Elevator Base block.
|
|
#Range: 1 ~ 256
|
|
elevator_base_blocks_per_base = 6
|
|
#The amount of air produced by using 100 FE (Forge Energy) in the flux compressor
|
|
#Range: > 0
|
|
flux_compressor_efficiency = 40
|
|
#Can the Kerosene Lamp burn any kind of fuel? If false, only Kerosene can be burnt
|
|
kerosene_lamp_can_use_any_fuel = true
|
|
#Kerosene Lamp fuel efficiency: higher values mean fuel will last longer in the lamp
|
|
#Range: 0.0 ~ 1.7976931348623157E308
|
|
kerosene_lamp_fuel_efficiency = 1.0
|
|
#Changing this value will alter the pressurized air production of the Electric Compressor. The input, EU, will stay the same
|
|
#Range: > 0
|
|
electric_compressor_efficiency = 40
|
|
#The amount of FE (Forge Energy) produced by using 100mL of air in the Pneumatic Dynamo
|
|
#Range: > 0
|
|
pneumatic_dynamo_efficiency = 40
|
|
#Changing this value will alter the pressurized air usage of the Pneumatic Generator. The output, EU, will stay the same.
|
|
#Range: > 0
|
|
pneumatic_generator_efficiency = 40
|
|
#Chance per tick of Crop Supports causing a growth tick. The default, 0.002, is roughly 2.5 times faster than the vanilla growth rate
|
|
#Range: 0.0 ~ 1.7976931348623157E308
|
|
crop_sticks_growth_boost_chance = 0.002
|
|
#Changing this value will alter the hydraulic bar production of the Pneumatic Pump. The input, air, will stay the same
|
|
#Range: > 0
|
|
pneumatic_pump_efficiency = 40
|
|
|
|
["Pneumatic Armor"]
|
|
#Air usage for armor repair, in mL per Item Life Upgrade per point of damage repaired
|
|
#Range: > 0
|
|
repair_air_usage = 100
|
|
#Jetboots air usage in mL/tick (per Jet Boots Upgrade)
|
|
#Range: > 0
|
|
jet_boots_air_usage = 12
|
|
#Flippers Upgrade speed boost when floating in water
|
|
#Range: 0.0 ~ 1.0
|
|
flippers_speed_boost_floating = 0.045
|
|
#Base Pneumatic Armor startup time in ticks (before Speed Upgrades)
|
|
#Range: > 20
|
|
armor_startup_time = 200
|
|
#Air usage for Magnet Upgrade, in mL per item or XP orb attracted
|
|
#Range: > 0
|
|
magnet_air_usage = 20
|
|
#Air used per point of 'player air' restored by the Scuba Upgrade
|
|
#Range: > 1
|
|
scuba_multiplier = 8
|
|
#Flippers Upgrade speed boost when in water and feet on ground
|
|
#Range: 0.0 ~ 1.0
|
|
flippers_speed_boost_ground = 0.03
|
|
|
|
[Advanced]
|
|
#Precision to which pressurizable item air levels are synced to client. Default of 10 is precise enough to show pressure to 1 decimal place, which is what is display in client tooltips & pneumatic armor HUD. Lower values will sync less precisely, reducing server->client network traffic. Values higher than 10 are not recommended (will cause extra network traffic for no benefit).
|
|
#Range: 1 ~ 100
|
|
pressurizable_sync_precision = 10
|
|
#When set to true, the Kerosene Lamp's fake air blocks won't be registered and therefore removed from the world. Useful if this causes trouble (it shouldn't though)
|
|
disable_kerosene_lamp_fake_air_block = false
|
|
#When set to true, Drones will not execute any program. This is useful to set to true when due to a bug Drones are lagging your server or crashing it. Please report the bug if you encounter it.
|
|
stop_drone_ai = false
|
|
#Don't remove a water source block when picking up (drones, liquid hoppers, gas lift) if it has at least two water source neighbours. This can reduce lag due to frequent block updates, and can also potentially make water import much faster. Set this to false if you want no-infinite-water rules in a world, or want to limit the speed of water importing to vanilla block update rates.
|
|
dont_update_infinite_water_sources = true
|
|
#How far will a drone go to find a Charging Station when it's low on air? Note: drones will teleport, possibly across the world to someone else's base, if this range is very large.
|
|
#Range: > 16
|
|
max_drone_charging_station_search_range = 80
|
|
#The minimum interval in ticks between which fluid tank contents should be synced to clients. Smaller values mean smoother visual tank updates, but more of a performance cost in terms of network syncing. Note that fluid tank sync packets are also only sent when a fluid tank changes by more than 1% of its capacity, or 1000mB, whichever is smaller.
|
|
#Range: 1 ~ 100
|
|
fluid_tank_update_rate = 10
|
|
|
|
["Micromissile Properties"]
|
|
#Base explosion damage (modified by missile setup)
|
|
#Range: 0.0 ~ 1.7976931348623157E308
|
|
base_explosion_damage = 1.0
|
|
#Do micromissile explosions cause terrain damage?
|
|
damage_terrain = false
|
|
#Cooldown for missile firing in ticks
|
|
#Range: > 0
|
|
launch_cooldown = 15
|
|
#Base missile lifetime in ticks (modified by missile setup)
|
|
#Range: > 0
|
|
lifetime = 300
|
|
#Number of micromissiles per pod
|
|
#Range: > 0
|
|
missile_pod_size = 100
|
|
|
|
["Minigun Properties"]
|
|
#Weighted Ammo cartridge size
|
|
#Range: 1 ~ 30000
|
|
weighted_ammo_cartridge_size = 250
|
|
#Armor Piercing Ammo cartridge size
|
|
#Range: 1 ~ 30000
|
|
armor_piercing_ammo_cartridge_size = 250
|
|
#Explosive Ammo cartridge size
|
|
#Range: 1 ~ 30000
|
|
explosive_ammo_cartridge_size = 125
|
|
#Minigun Explosive Ammo explosion power (ref: 2 = creeper, 4 = TNT
|
|
#Range: 0.0 ~ 1.7976931348623157E308
|
|
explosive_ammo_explosion_power = 1.5
|
|
#Weighted Ammo damage multiplier (relative to standard ammo)
|
|
#Range: 0.0 ~ 1.7976931348623157E308
|
|
weighted_ammo_damage_multiplier = 2.5
|
|
#Weighted Ammo air usage multiplier (relative to standard ammo)
|
|
#Range: 0.0 ~ 1.7976931348623157E308
|
|
weighted_ammo_air_usage_multiplier = 8.0
|
|
#Damage done to entities within the fake 'ice' blocks cause by freezing ammo
|
|
#Range: 0.0 ~ 1.7976931348623157E308
|
|
freezing_ammo_fake_ice_damage = 1.0
|
|
#Show particles when a block is hit by minigun fire? Looks good, but consumes some network bandwidth.
|
|
block_hit_particles = true
|
|
#Base bullet damage of the Sentry Gun, Handheld Minigun, and Drone Minigun, before ammo bonuses are considered
|
|
#Range: 0.0 ~ 1.7976931348623157E308
|
|
base_damage = 4.0
|
|
#Freezing Ammo cartridge size
|
|
#Range: > 0
|
|
freezing_ammo_cartridge_size = 500
|
|
#Base range of Minigun, before Range Upgrades are considered
|
|
#Range: 5 ~ 100
|
|
base_range = 50
|
|
#Incendiary ammo fire duration on target entities (seconds)
|
|
#Range: > 0
|
|
incendiary_ammo_fire_duration = 8
|
|
#Incendiary ammo base percentage chance to ignite entities
|
|
#Range: 1 ~ 100
|
|
incendiary_ammo_entity_ignite_chance = 100
|
|
#Incendiary ammo base percentage chance to ignite blocks
|
|
#Range: 1 ~ 100
|
|
incendiary_ammo_block_ignite_chance = 20
|
|
#Armor Piercing Ammo percentage chance to ignore target's armor
|
|
#Range: 1 ~ 100
|
|
ap_ammo_ignore_armor_chance = 100
|
|
#Incendiary Ammo cartridge size
|
|
#Range: 1 ~ 30000
|
|
incendiary_ammo_cartridge_size = 500
|
|
#Percentage chance per shot of potion-tipped ammo proc'ing the potion effect, before Dispenser Upgrades are considered
|
|
#Range: 1 ~ 100
|
|
potion_proc_chance = 7
|
|
#Does Minigun Explosive Ammo damage terrain?
|
|
explosive_ammo_terrain_damage = false
|
|
#Standard Ammo cartridge size
|
|
#Range: 1 ~ 30000
|
|
standard_ammo_cartridge_size = 1000
|
|
#Armor Piercing Ammo damage multiplier (relative to standard ammo)
|
|
#Range: 0.0 ~ 1.7976931348623157E308
|
|
ap_ammo_damage_multiplier = 1.25
|
|
#Weighted Ammo range multiplier (relative to standard ammo)
|
|
#Range: 0.0 ~ 1.7976931348623157E308
|
|
weighted_ammo_range_multiplier = 0.2
|
|
#Freezing Ammo base percentage chance to form ice or snow on blocks which have been hit
|
|
#Range: 0 ~ 100
|
|
freezing_ammo_block_ice_chance = 10
|
|
#Minigun Explosive Ammo damage multiplier (relative to standard ammo)
|
|
#Range: 0.0 ~ 1.7976931348623157E308
|
|
explosive_ammo_damage_multiplier = 0.2
|
|
#Freezing Ammo base percentage chance to form ice on entities which have been hit
|
|
#Range: 0 ~ 100
|
|
freezing_ammo_entity_ice_chance = 20
|
|
#Explosive Ammo base percentage chance to cause an explosion
|
|
#Range: > 0
|
|
explosive_ammo_explosion_chance = 50
|
|
|
|
[Integration]
|
|
#Immersive Engineering: External Heater RF/t. Set to 0 to disable External Heater integration entirely.
|
|
#Range: > 0
|
|
ie_external_heater_r_fper_tick = 100
|
|
#Immersive Engineering: External Heater heat/RF. The amount of PneumaticCraft heat added by 1 RF.
|
|
#Range: 0.0 ~ 1.7976931348623157E308
|
|
ie_external_heater_heat_per_rf = 0.01
|
|
#Mekanism thermal resistance multiplier. Larger values mean slower heat transfer between Mekanism and PneumaticCraft blocks.
|
|
#Range: 1.0 ~ 1.7976931348623157E308
|
|
mek_thermal_resistance_factor = 5.0
|
|
#Mekanism <-> PneumaticCraft heat conversion efficiency. Set to 0 to disable Mekanism heat integration entirely. Note that Mekanism and PNC use a similar heat system, but scale things quite differently (Mekanism heaters produces a LOT of heat by PneumaticCraft standards), so conversion efficiency tuning is important for inter-mod balance.
|
|
#Range: 0.0 ~ 2.0
|
|
mek_thermal_conversion_efficiency = 0.01
|
|
|
|
[Recipes]
|
|
#Enable/disable explosion crafting (iron->compressed iron). If you disable this, you'll need another way to get compressed iron initially.
|
|
explosion_crafting = true
|
|
#Enable crafting diamonds from coal blocks in the pressure chamber
|
|
coal_to_diamonds = true
|
|
|
|
[Amadron]
|
|
#Time in ticks between each periodic offer reshuffle (24000 ticks = one Minecraft day)
|
|
#Range: > 1000
|
|
reshuffleInterval = 24000
|
|
#Max number of custom trades a player may add
|
|
#Range: > 0
|
|
max_trades_per_player = 50
|
|
#Broadcast a notification when player adds a custom trade
|
|
notify_of_trade_addition = true
|
|
#Broadcast a notification when player removes a custom trade
|
|
notify_of_trade_removal = true
|
|
#Broadcast a notification when a custom Amadron trade is made
|
|
notify_of_deal_made = true
|
|
#Number of villager offers randomly selected for the 'live' offer list. Note: this a maximum, and the actual number chosen each time may be less.
|
|
#Range: > 0
|
|
numVillagerOffers = 20
|
|
#Number of periodic offers randomly selected for the 'live' offer list. Note: this a maximum, and the actual number chosen each time may be less.
|
|
#Range: > 0
|
|
numPeriodicOffers = 10
|
|
|
|
[Heat]
|
|
#Default thermal resistance for fluid blocks
|
|
#Range: 4.9E-324 ~ 1.7976931348623157E308
|
|
fluidThermalResistance = 100.0
|
|
#Default thermal resistance for solid blocks
|
|
#Range: 4.9E-324 ~ 1.7976931348623157E308
|
|
blockThermalResistance = 500.0
|
|
#Ambient temperature increase by altitude, in degrees per block below 48 (or 75% of sea level). Note that temperature decrease per block above 64 is handled by vanilla.
|
|
#Range: 0.0 ~ 10.0
|
|
ambientTemperatureHeightModifier = 0.1
|
|
#Thermal resistance of air; controls how fast blocks lose heat to air when exposed
|
|
#Range: 1.0 ~ 1.7976931348623157E308
|
|
airThermalResistance = 100.0
|
|
#Ambient temperature modifier by biome (default 25 gives the Nether a heat boost of 30C)
|
|
#Range: 0.0 ~ 1000.0
|
|
ambientTemperatureBiomeModifier = 25.0
|
|
#Default heat capacity for fluid blocks
|
|
#Range: > 0
|
|
defaultFluidHeatCapacity = 10000
|
|
|
|
[Logistics]
|
|
#Minimum pressure for a Logistics Module to function
|
|
#Range: 0.0 ~ 20.0
|
|
min_pressure = 3.0
|
|
#Logistics Module air usage per mB of fluid per block distance
|
|
#Range: 0.0 ~ 1.7976931348623157E308
|
|
fluid_transport_cost = 0.02
|
|
#Logistics Module air usage per item per block distance
|
|
#Range: 0.0 ~ 1.7976931348623157E308
|
|
item_transport_cost = 1.0
|
|
|
|
[Jackhammer]
|
|
#Base Jackhammer air usage per block broken (speed upgrades increase this)
|
|
#Range: > 0
|
|
base_air_usage = 50
|
|
#Max veinmining range (distance from mined block) for Vein Miner Plus mode
|
|
#Range: 1 ~ 32
|
|
max_vein_miner_range = 10
|
|
|
|
[Villagers]
|
|
#Add a village house for the Pressure Mechanic? Note: setting this to false won't affect any already-generated houses, only disable new generation.
|
|
addMechanicHouse = true
|
|
#Which trades should the Pressure Mechanic offer? ALL will offer all trades. PCB_BLUEPRINT will offer *only* the PCB Blueprint, an item required for normal progression through the mod. NONE will offer nothing (but the PCB Blueprint is also available via Amadron by default). Note that changing this won't affect any already-spawned Pressure Mechanics.
|
|
#Allowed Values: NONE, PCB_BLUEPRINT, ALL
|
|
mechanicTrades = "ALL"
|
|
|